A user has installed two new drives in one of the computers in the computer lab and has been unable to format Disk1 from the command prompt. The lab requires that Disk1 be a dynamic disk configured with two partitions. The first partition must be 256,000 MB in size and mapped to drive F. The second partition must be 512,000 MB in size and mapped to drive G. The new partitions must be formatted to ensure that users files can be secured from other users and that disk must be configured to account for future redundancy. Instructions: Conduct the necessary steps within the Disk Manager to accomplish these tasks. When you have completed the simulation, please, select the Done button to submit.

It is vital to research each of the services you plan to disable before implementing any change, especially on critical machines such as the: a. servers in the test environment. b. domain controller and other infrastructure servers. c. desktops that have previously been attacked. d. desktops used by upper-level management.

The instruction ishl (shift left integer) exists in jvm but not in ijvm. it uses the top two values on the stack, replacing the two with a single value, the result. the sec- ond-from-top word of the stack is the operand to be shifted. its content is shifted left by a value between 0 and 31, inclusive, depending on the value of the 5 least signifi- cant bits of the top word on the stack (the other 27 bits of the top word are ignored). zeros are shifted in from the right for as many bits as the shift count. the opcode for ishl is 120 (0x78).a. what is the arithmetic operation equivalent to shifting left with a count of 2? b. extend the microcode to include this instruction as a part of ijv.

You have a linux system that has a 1000gb hard disk drive, which has a 90gb partition containing an ext4 filesystem mounted to the / directory and a 4gb swap partition. currently, this linux system is only used by a few users for storing small files; however, the department manager wants to upgrade this system and use it to run a database application that will be used by 100 users. the database application and the associated data will take up over 200gb of hard disk space. in addition, these 100 users will store their personal files on the hard disk of the system. each user must have a maximum of 5gb of storage space. the department manager has made it very clear that this system must not exhibit any downtime as a result of hard disk errors. how much hard disk space will you require, and what partitions would you need to ensure that the system will perform as needed? where would these partitions be mounted? what quotas would you implement? what commands would you need to run and what entries to /etc/fstab would you need to create? justify your answers.