Linda has been assigned the job of connecting five computers to a network. the room holding the five computers has three network jacks that connect to a switch in an electrical closet down the hallway. linda decides to install a second switch in the room. the new switch has four network ports. she uses one port to connect the switch to a wall jack. now she has five ports available (two wall jacks and three switch ports). while installing and configuring the nics in the five computers, she discovers that the pcs connected to the two wall jacks work fine, but the three connected to the switch refuse to communicate with the network. what could be wrong and what should she try next?

1. ask the user how many questions are in the quiz. 2. ask the user to enter the key (that is, the correct answers). there should be one answer for each question in the quiz, and each answer should be an integer. e.g., 34 7 13 100 81 3 9 10 321 12 might be the key for a 10-question quiz. you will need to store the key in an array. 3. ask the user to enter the answers for the quiz to be graded. there needs to be one answer for each question. note that these answers do not need to be stored; each answer can simply be compared to the key as it is entered. 4. when the user has entered all of the answers to be graded, print the number correct and the percent correct. 5. add a loop so that the user can grade any number of quizzes with a single key. after the results have been printed for each quiz, ask "grade another quiz? (y/n)." note: you only have one array (the key). you are not creating a new key for each set of quiz answers.

Draw the resistor’s voltage and current phasors at t=15ms. draw the vectors with their tails at the origin. the orientation of your vectors will be graded. the exact length of your vectors will not be graded.

Each time you save a document, you will need to type in the file type in which it should be saved you can select the save button to save it with the same file name if it has been previously saved you will need to select the location to save the file you will need to use the save as dialog box