subject

Three resistors: R1 = 3 Ω,R2 = 6 Ω, and R3 = 9 Ω are connected in series to each other and to a 36 V battery. What is the ammeter reading after the switch is closed?

ansver
Answers: 1

Another question on Computers and Technology

question
Computers and Technology, 23.06.2019 07:00
1. you have a small business that is divided into 3 departments: accounting, sales, and administration. these departments have the following number of devices (computers, printers, etc.): accounting-31, sales-28, and administration-13. using a class c private network, subnet the network so that each department will have their own subnet. you must show/explain how you arrived at your conclusion and also show the following: all available device addresses for each department, the broadcast address for each department, and the network address for each department. also, determine how many "wasted" (not usable) addresses resulted from your subnetting (enumerate them).
Answers: 3
question
Computers and Technology, 23.06.2019 09:30
:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.
Answers: 1
question
Computers and Technology, 24.06.2019 01:00
How can the temperature of a room be raised by 5degreesf?
Answers: 1
question
Computers and Technology, 24.06.2019 15:30
What is the function of compilers and interpreters? how does a compiler differ from an interpreter?
Answers: 2
You know the right answer?
Three resistors: R1 = 3 Ω,R2 = 6 Ω, and R3 = 9 Ω are connected in series to each other and to a 36 V...
Questions
question
Mathematics, 22.10.2020 17:01
question
English, 22.10.2020 17:01
question
Health, 22.10.2020 17:01
Questions on the website: 13722363