Which piece of hardware is used for telecommunication? A. DSL
B. LAN
C. Network switch
D. Hard drive

The answer is A

You will be given two character arrays of the same size, one will contain a number of ships. ships will move around the character array based on which way they are facing and the route they are on. routes are given in the other array. the route consists of '-' and '|' for straight paths, '\' and '/' for curves, and '+' for intersections. there are ships on these routes. ships always face a direction, '^' for up, '> ' for right, 'v' for down, and '< ' for left. any time the ships hit a '\' or a '/' it will turn as you would expect a ship to turn (e.g. a '^' that moves into a '/' will turn right). at an intersection, ships will always continue straight through. all ships move at the same speed, ships take turns moving and all ships move during one 'tick'. the one in the most top left goes first, followed by those to its right, then the ones in the next row. it iterates along the rows and then down the columns. each ship moves one space on its turn moving along the route. your function needs to return the position of the first collision between two ships and the number of ticks before the crash occurred.

The qwerty keyboard is the most common layout of keys on a keyboard

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to