subject

Which function is used to display a string value to the screen? main[]
print()
run=
SHOW!

ansver
Answers: 3

Another question on Computers and Technology

question
Computers and Technology, 22.06.2019 23:50
You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?
Answers: 3
question
Computers and Technology, 24.06.2019 16:50
Ideally, the backrest is tilted back slightly, so when you turn the wheel your shoulders are the seat.
Answers: 2
question
Computers and Technology, 25.06.2019 09:30
When recovering from a skid, make sure to as necessary to guide your vehicle toward the center of your lane. a. threshold steer b. counter steer c. oversteer d. understeer
Answers: 1
question
Computers and Technology, 25.06.2019 09:30
1. write a statement that declares a string variable named city. the variable should be initialized so it references an object with the string “san francisco”. a) assume that stringlength is an int variable. write a statement that stores the length of the string referenced by the city variable (declared in question1) in stringlength. b) assume that onechar is a char variable. write a statement that stores the first char- acter in the string referenced by the city variable (declared in question1) in onechar. c) assume that uppercity is a string reference variable. write a statement that stores the uppercase equivalent of the string referenced by the city variable (declared in question 1) in uppercity. d) assume that lowercity is a string reference variable. write a statement that stores the lowercase equivalent of the string referenced by the city variable (declared in question 1) in lowercity.
Answers: 3
You know the right answer?
Which function is used to display a string value to the screen? main[]
print()
run=
Questions
question
World Languages, 18.02.2022 04:30
question
Mathematics, 18.02.2022 04:30
Questions on the website: 13722367