You have an array of integers: int myints[10]; and the address of the first integer is be4350. What is the address of myints[1]? myints[2]?

1. so if i wanted to build a linux server for web services(apache) with 1cpu and 2 gb of memory.-operating at 75% of memory capacity2. a windows server with 2 cpu/ 4gb memory- operating at 85% of memory capacity3. a storage server with 1 cpu/ 2gb memory- operating at 85% of memory capacityhow much memory do i have to add for each server.so that the utilization rate for both cpu and memory is at a baseline of 60%."the details for the cpu like its processor or the memory's speed isnt to be concerned" yeah i kept asking my teacher if he's even sure about the but the whole class seems to be confused and the project is due in 3 days..this is a virtualization project where i have to virtualize a typical server into an exsi hypervisor.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Use a physical stopwatch to record the length of time it takes to run the program. calculate the difference obtained by calls to the method system.currenttimemillis() just before the start of the algorithm and just after the end of the algorithm. calculate the difference obtained by calls to the method system.currenttimemillis() at the start of the program and at the end of the program so that the elapsed time includes the display of the result. use the value returned by the method system.currenttimemillis() just after the end of the algorithm as the elapsed time.