Computers and Technology, 21.07.2020 15:01 lissa34

The IP protocol (and UDP) are called "connectionless" and "unreliable." Describe what those two words mean in the context of data communications?

Answers: 3

Show answers

Answers

Answer from: tai1611

Explanation:

In data communications, a protocol is connectionless if it describes communication between two devices in a network without first establishing or verifying establishment of some link (connection) between the two devices. In a connectionless protocol, data are exchanged between processes or devices without a prior check of whether the processes are ready to transmit data or not. In this type of protocol, there's no verification put in place to remember if these processes were or are in communication. Connectionless protocols are also called stateless protocols. Because connectionless protocol cannot be relied upon due to its lack of delivery-assurance policy, it is sometimes referred to as unreliable protocol. In other words, delivery of data packets is not guaranteed. An example of a connectionless protocol is the UDP (User Datagram Protocol).

However, if the protocol defines some checks to ascertain that there is first a connection between two communicating processes before beginning transmission, then, the protocol is connection-oriented. An example of this is the TCP (Transmission Control Protocol). Connection-oriented protocols are reliable since they ensure connection be made between processes before transmitting data packets.

A typical application of a connectionless/unreliable protocol is in the streaming of real time videos or voice communication where packets of data could be dropped and not resent.

An example of the connection-oriented/reliable protocol is analogous to making a telephone call where data packets (voice messages) are not sent until the receiver on the other end makes a connection.

Answer from: Quest

Work with a monitor that’s calibrated and profiled. for critical image editing, calibration and profiling are essential. otherwise, the image you see on your monitor looks different on other monitors or when printed.plan to use adjustment layers to adjust the tonal range and color balance of your image. adjustment layers let you go back and make successive tonal adjustments without discarding or permanently modifying data from the image layer. keep in mind that using adjustment layers adds to the file size of the image and demands more ram from your computer. accessing the color and tonal commands in the adjustments panel automatically creates adjustment layers.if you don’t want to use adjustment layers, you can apply adjustments directly to an image layer. remember that some image information is discarded, when making a color or tonal adjustment directly to an image layer.for critical work and maximum preservation of image data, it’s best if the image you work with is 16 bits per channel (16‑bit image) rather than 8 bits per channel (8‑bit image). data is discarded when you make tonal and color adjustments. the loss of image information is more critical in an 8‑bit image than a 16‑bit image. generally, 16‑bit images have a larger file size than 8‑bit images.duplicate or make a copy of the image file. working on a copy of your image preserves the original in the event you want to use the image in its original state.remove any flaws such as dust spots, blemishes, and scratches from the image before making color and tonal adjustments.open the info or histogram panel in expanded view. as you evaluate and correct the image, both panels display invaluable feedback on your adjustments.you can make a selection or use a mask to confine your color and tonal adjustments to part of an image. another way to apply color and tonal adjustments selectively is to set up your document with image components on different layers. color and tonal adjustments are applied to only one layer at a time. only the image components on the targeted layer are affected.

Answer from: Quest

Google 'climate change' and it will bring up tons of info and websites. its up to you which website you choose.

Another question on Computers and Technology

Computers and Technology, 23.06.2019 05:20

Which operating system is a version of linux?

Answers: 1

Answer

Computers and Technology, 23.06.2019 10:50

The volume v and paper surface area a of a conical paper cup are given by where r is the radius of the base of the cone and h is the height of the cone. a. by eliminating h, obtain the expression for a as a function of r and v. b. create a user-de ned function that accepts r as the only argument and computes a for a given value of v. declare v to be global within the function. c. for v ! 10 in.3 , use the function with the fminbnd function to compute the value of r that minimizes the area a. what is the corresponding value of the height h? investigate the sensitivity of the solution by plotting v versus r. how much can r vary about its optimal value before the area increases 10 percent above its minimum value?

Answers: 1

Answer

Computers and Technology, 23.06.2019 14:30

Select the correct answer. peter has launched a website that features baby products. however, clients often find they are unable to access the website because the server is down. which feature of cybersecurity should peter focus on for his website? a. data authenticity b. data privacy c. data availability d. data integrity e. data encryption

Answers: 3

Answer

Computers and Technology, 23.06.2019 18:00

Ramona enjoys her job because she is able to kids in an after school program. the work value ramona feels strongest about is a. leadership b. risk c. independence d. work with people select the best answer from the choices provided a b c d

Answers: 1

Answer

You know the right answer?

The IP protocol (and UDP) are called "connectionless" and "unreliable." Describe what those two word...

Questions