Write a MIPS assembly program to initialize an array that has five elements by storing register $s0 in the first element of the array, register $s1 in the second element, register $s2 in the third element, register $s3 in the fourth element, and register $s4 in the fifth element. Assume $s0

Gabe wants to move text from one document to another document. he should copy the text, paste the text, and open the new document highlight the text, select the cut command, move to the new document, make sure the cursor is in the correct location, and select the paste command select the save as command, navigate to the new document, and click save highlight the text, open the new document, and press ctrl and v

How can you repin an image on your pinterest pin board a. click on the "repin" button b. click on the "add pin" button c. click on the "upload a pin" button d. click on the "save pin" button.

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.