Write code that will prompt the user to provide a time between 0 and 200. The code should use euler or ode45 to determine the pressure in tank 1 at the given time. The code must result in an error if the pressure in tank 2 ever exceeds the pressure in tank 1. The error check must be a part of the code and checked each time the mass or pressure is updated during the solution. The initial pressure in Tank 1 is 300 kPa, and the initial pressure in Tank 2 is 50 kPa. The answer must be correct to 4 decimal places. Use formatted output to print your name, the pressure of tank 1, and the pressure of tank 2 at the given time.

Problems: 1. using textbooks, reference books, and internet as your source of research, draw the following microprocessor microarchitectures i. intel 8086 ii. motorola 68000 i atmel atmega32 iv. mips single cycle v. arm cortex-m3 write an hdl module for a hexadecimal seven-segment display decoder. the input is 4-bit binary representing a hex number (0-f), and the output is 8-bit seven segment display bits (a-h). thus, the decoder must handle the digits 10 - 15 to display a-f respectively, in addition to 0-9 numbers. 2. design a 4-bit left and right rotator (both outputs). first sketch schematic diagrams of your design. then implement your design using hdl coding. 3. 4. design a modified priority encoder that receives an 8-bit input, a7: 0 and produces a 3-bit output, y2o. y indicates the most significant bit of the input that is true. y should be 0 if none of the inputs are true. give a simplified boolean equation, sketch a schematic, and write an hdl code. 5.write an 8: 1 multiplexer module called mux8 with selection inputs s, data input d, and data output y. data input (d) and data output (v) are 32-bit wide

For all machines-not just hammers- the user applies force force to the machine to the machine over a certain distance. a. input b. output c. duo d. none of the above

In which phase does software coding and testing happen in the spiral model? the spiral model does not have a separate testing phase. both, software coding and testing occurs during the phase.