A network engineer is troubleshooting an unsuccessful PPP multilink connection between two routers. The multilink interface has been created and assigned a number, the interface has been enabled for multilink PPP, and the interface has been assigned a multilink group number that matches the group assigned to the member physical serial interfaces. The physical serial interfaces have also been enabled for PPP multilink. Which additional command should to be issued on the multilink interface?

Where would you click to edit the chart data?

Kirk found a local community college with a two-year program and he is comparing the cost with that of an out-of-state two-year school. what is the expected total cost for one year at the local community college if kirk lives at home? what is the expected total cost for one year at the out-of-state school if kirk lives on campus?

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?