You plug a USB flash memory drive into a system that has two SATA hard disks. How will the partition on this USB flash memory drive be identified by Linux?

/dev/sdc1

Explanation:

The udev system of Linux will recognize SCSI/SATA drives in the /dev/sda..., /dev/sdb..., /dev/sdc... series depending on the order of attachment.

If at the time of mounting the first SCSI/SATA drive, It believes the /dev/sda... series is not in use in the system it will mount that drive and its partitions as /dev/sda1, /dev/sda2, /dev/sda... and then the next SCSI/SATA drive and its partitions as /dev/sdb1, /dev/sdb2, /dev/sdb... and so on.

In this case, since two SATA hard disks are already attached, those first two would have taken up the /dev/sda... and /dev/sdb... series leaving the USB flash memory drive, another SCSI/SATA drive with the /dev/sdc... series.

the printer can be used in a both wired and wireless network, only one of the connection methods can be used at one time when the wireless setting is enabled, the wired (ethernet) setting is disabled.

but first you need to

`connect the cord to your computer

`open settings app from the start menu

`click devices

`than click add printer or scanner

and than you should be able to do it from there, if not let me know i can you! : )