Anetwork engineer configures a router with the following commands. ro3(config)# interface f0/5 ro3(config-if)# ipv6 address 2005: ac9: 5b: 1: : 1/64 ro3(config-if)# no shut ro3(configif)# end the router is connected to a switch in vlan 10 and is working correctly on that vlan. a network engineer configures a new computer to use slaac and assigns the computer to vlan 10. 1. the computer is unable to obtain the correct ipv6 prefix and prefix length. what is wrong?

The blank button automatically displays next to the data when you select a range of numeric data which is an available option for creating a chart

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Guys do you know sh27 cause he hacked me : ( pidgegunderson my old user