You are configuring a switch so that you can manage it via putty from the same network segment as the switch. on the switch, you enter the following commands: switch#config terminalswitch(config)#interface vlan 1switch(config-if) #ip address 192.168.1.10 255.255.255.0will this configuration work? a) no, the ip default gateway command needs to be setb)no, the no shutdown command needs to be enteredc)no, the switch needs to obtain ip address from the dhcp server using the ip address dhcp commandd)yes, the switch can now be access via putty by using the ip address 192.168.1.10

Which of the choices sean are not true when considering virus behavior

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

If you want to delete an entire word at a time, which key should you press along with the backspace or delete key?