An operating system is the master controller for all activities that take place within a computer. what are the three most common operating systems?

windows

mac os

linux

ms word

Data is processed, stored, and transmitted as a series of 1s and 0s. each 1 or 0 is called a(n) . a series of eight 0s and 1s, called a(n) , represents one character—a letter, number, or punctuation mark. data becomes when it is presented in a format that people can understand and use. digital signals are represented by two different , such as +5 volts and +.2 volts. digital data can also take the form of light and dark spots etched onto the surface of a cd or the positive and negative orientation of particles on the surface of a hard disk. data consists of numbers that might be used in arithmetic operations. it can be represented digitally using the number system. data is composed of letters, symbols, and numerals that are not used in arithmetic operations. computers represent this type of data using , ebcdic, unicode, or utf-8. data is quantified using terms such as or kibibyte (1024 bytes), and prefixes such as or mebi (1,048,576), and giga or (1,073,741,824). to reduce file size and transmission times, digital data can be compressed. compression provides the means to compress data and reconstitute it into its original state. compression throws away some of the original data during the compression process. compressed files usually have at the end of the file name and are represented with special icons. these files have to be or unzipped before you can view the data they contain.

1. before plugging in a new device to a computer you should unplug all other devices turn off the computer turn on the computer 2. many of the maintenance tools for a computer can be found in the control panel under administrative tools display personalization

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?