Computers and Technology, 10.10.2019 22:10 starreee

1. what tolerances are given for:
(a) angular dimensions?

(b) decimal dimensions?

2. give the body taper specifications.

3. what is the taper per inch for the body?

4. what is the diameter at the small end of the outside taper?

5. determine basic dimension a.

6. give the taper for the hole.

7. what is the taper per inch for the hole?

8. give the diameter at the small end of the inside taper.

9. compute basic dimension b.

10. give the outside thread specifications.

11. what does the lh in the thread note for the shank end specify?

12. what thread class is the 20 threaded nose?

13. what operation is performed on the 2.750 diameter?

14. how is this operation specified?

15. determine the maximum diameter for the reamed hole.

16. give the note for the four holes in the largest diameter.

17. specify the chamfer for the knurled area.

18. specify the angle of chamfer for the 20 threaded nose.

19. how deep is the 20 threaded chamfer?

20. give the original basic length of the tapered body before any change was made.

21. compute the maximum length of dimension c.

22. what matching operation is indicated by the finish symbol

?
23. determine basic dimension d.

24. give the dimensions of the keyseat.

25. determine the basic overall length of the adapter.

26. name three different types of fits.

27. describe briefly the purpose of (a) positive clearance and (b) negative clearance.

28. give the limit dimensions for the .8750 hole.

1. what tolerances are given for: (a) angular dimensions? (b) decimal dim

Answers: 3

Show answers

Another question on Computers and Technology

Computers and Technology, 22.06.2019 02:20

The reset circuit used on the four 3-bit counters analyzed in this activity reset the counts to zero (000). it makes sense for the up-counters to start at zero (000), but the down-counters should start at seven (111). what would you need to change so that the 3-bit binary down counter with j/k flip-flops you just created would reset to seven (111)?

Answers: 1

Answer

Computers and Technology, 23.06.2019 09:30

You have been supporting csm tech publishing's windows server 2016 server network for over a year. the office has two windows server 2016 servers running active directory and a number of other roles. management has informed you that a small sales office is opening in the same building three floors up. the sales manager wants to install a sales application on a server located in the sales office. this server will have limited physical security because there's no special room dedicated for it, which means it will be accessible to non-it personnel and visitors. you're considering installing windows server 2016 server core on the new server because accessing its console regularly probably won't be necessary, and this server will be managed from one of the other csm tech publishing servers. what are the benefits and drawbacks of using server core for this branch office? what are some things you should do to set up this server management environment?

Answers: 1

Answer

Computers and Technology, 24.06.2019 13:30

To move an excel worksheet tab, simply right-click on it drag and drop it double-click on it delete it

Answers: 1

Answer

Computers and Technology, 25.06.2019 08:10

The component of an information system consists of raw facts and by itself

Answers: 1

Answer

You know the right answer?

1. what tolerances are given for:
(a) angular dimensions?

(b) decimal dimensions...