Chemistry, 18.07.2019 00:10 isabelvaldez123

Under which conditions would the solubility of a gas be greatest? high pressure and high temperature high pressure and low temperature low pressure and high temperature low pressure and low temperature

Answers: 1

Show answers

Answers

Answer from: saifulcrc1397

high pressure and low temperature

Explanation:

Solubility of a gas is the amount of gas (concentration) that can be dissolved in a liquid.

Based on Henry's law, the solubility (C) of a gas is directly proportional to its pressure (P) above the liquid. i,e,

$C = k_{H} * P ------(1)$

where kH = Henry's constant

Therefore, the solubility will increase with increase in pressure.

Lowering the temperature will lower the kinetic energy of the gas molecules and prevent them from escaping into the gas phase thereby increasing their solubility in water.

Answer from: rcolavit

high pressure and low temperature

Explanation:

Generally, solubility varies with temperature. In most substances, an increase in temperature causes an increase in solubility. That's why sugar dissolves better in hot coffee, and the chocolate bar must be dipped in hot milk to make a submarine.

The solubility of gases dissolved in liquids is different from that of solids. The solubility of a gas in water increases with the pressure of the gas on the solvent, if the pressure decreases, the solubility also decreases

The solubility of gases in liquids has a different behavior from that of solids. Both pressure and temperature have a strong influence on its solubility.

What is happening with the molecules? As the temperature rises, the energy of movement (kinetics) of the solute and solvent particles increases, thereby weakening the intermolecular forces. In this way, interactions between its particles and those of solvent are established, favoring the mixing.

In the case of gases, the decrease in intermolecular forces "releases" the gas molecules from the forces that keep them in solution and will escape from the container, so it will be observed that as the temperature increases, the solubility of a gas decreases in a solvent like water.

Gases dissolved in drinking water (mainly oxygen and nitrogen, the main components of the air) are responsible for the small bubbles that appear when the liquid heats up and has not yet reached the boiling point. That is, as it warms up, the molecules acquire enough kinetic energy to leave the liquid. When the water boils, it is completely degassed and a time is required for these gases to return to the liquid.

Answer from: Quest

hi,

the answer is d, it has indefinite shape but definite volume.

hope this !

Answer from: Quest

the millers tale is the answer.

Another question on Chemistry

Chemistry, 22.06.2019 07:20

Why does his teacher ask him to balance the equation by including the correct coefficient

Answers: 1

Answer

Chemistry, 22.06.2019 11:00

Problem page combustion of hydrocarbons such as pentane ( c5 h12 ) produces carbon dioxide, a "greenhouse gas." greenhouse gases in the earth's atmosphere can trap the sun's heat, raising the average temperature of the earth. for this reason there has been a great deal of international discussion about whether to regulate the production of carbon dioxide.(a) write a balanced chemical equation, including physical state symbols, for the combustion of liquid pentane into gaseous carbon dioxide and gaseous water. (b) suppose 0.350 kg of pentane are burned in air at a pressure of exactly 1 atm and a temperature of 20.0 degree c. calculate the volume of carbon dioxide gas that is produced.be sure your answer has the correct number of significant digits.

Answers: 2

Answer

Chemistry, 22.06.2019 14:00

The content of manganese (mn) in steel was determined spectrophotometrically and with the use of the standard addition method. an unknown sample of mn from a digested steel sample gave an absorbance of 0.185 when analyzed spectrophotometrically. when 5.00 ml of solution containing 95.5 ppm mn was added to 50.0 ml of the unknown steel solution (digested sample), the absorbance was 0.248. calculate the concentration, in parts-per-million (ppm), of mn in the digested steel sample solution.

Answers: 3

Answer

Chemistry, 22.06.2019 17:00

The atoms of a solid aluminum can are close together, vibrating in a rigid structure. if the can is warmed up on a hot plate, what happens to the atoms?

Answers: 1

Answer

You know the right answer?

Under which conditions would the solubility of a gas be greatest? high pressure and high temperatur...

Questions