Chemistry, 03.06.2021 21:00 ARAYAMYHAND

Help me with chem pls!

Answers: 2

Show answers

Answers

Answer from: Quest

geosphere and hydrosphere.

this is because the geosphere has to do with geological events, while the hydrosphere controls all water on earth.

Answer from: Quest

on passing the small ampere of electric current through the tube made of ar and hg of cfl generates uv rays which excites the fluorescent and thus emits the high radiation by consumption of just 5- 12 w in comparison to incandescent light which requires more power such as around 40 - 55 w to lighten.

moreover the life span of fluorescent or cfl is around 8000 h whereas the life span of incandescent is around 1200 h

hence, the building installed with incandescent lights bears more electricity bill.

Answer from: Quest

Ijust took the quiz. their is no coefficient needed. : )

Answer from: Quest

the missing options are :

(1) lower boiling point and a lower freezing point(2) lower boiling point and a higher freezing point(3) higher boiling point and a lower freezing point(4) higher boiling point and a higher freezing point

answer : the correct answer is option (3) higher boiling point and a lower freezing point

explanation :

when a non volatile solute is added to a solvent like water, it results in elevation of boiling point.

let us find the increase in boiling point of water when cacl₂ is added to water to make a solution of 1 m

step 1 : find molality of the solution

let us assume we have 1 l of solution.

$m = \frac{moles (solute)}{l ( solution)}$

$1 m = \frac{moles (cacl_{2})}{1 l }= 1 mol cacl_{2}$

let us convert this to grams of cacl₂.

molar mass of cacl2 is 111 g/mol

grams of cacl₂ = $1 mol \times \frac{111g}{mol} = 111 g cacl_{2}$

mass of solute = 111 g

assuming density of solution same as water which is 1g/ml we have ,

mass of solution = density * volume

mass of solution = $\frac{1g}{ml} \times 1000 ml = 1000 g$

mass of solution = mass of solvent + mass of solute

mass of solute = 1000g - 111g

mass of solute 889 g = 0.889 kg

the molality of the solution can be calculated as

$molality = \frac{mol (solute)}{kg ( solvent)}$

$molality = \frac{1mol}{0.889kg}$

molality = 1.12 m

step 2 : find boiling point elevation.

the elevation in boiling point is calculated as

$\bigtriangleup t_{b} = i \times k_{b} \times m$

here δtb = boiling point elevation

i = vant hoff factor which is the number of ions formed by the solute .

cacl₂ dissociates as $cacl_{2} \rightarrow ca^{2+} + 2 cl^{-}$

it forms 3 ions . therefore,

i = 3

m = molality which is 1.12 m

kb is constant for a given solvent. for water it is 0.512

$\bigtriangleup t_{b} = 3 \times 0.512 \times 1.12$

$\bigtriangleup t_{b} = 1.7$

the boiling point of water increases by 1.7 °c

step 3: find freezing point depression.

when a non volatile solute is added to water, it results in decrease in freezing point.

the formula to find freezing point depression is

$\bigtriangleup t_{f} = i \times k_{f} \times m$

kf is constant for water and its value is 1.86

$\bigtriangleup t_{f} = 3 \times 1.86 \times 1.12$

$\bigtriangleup t_{f} = 6.2$

the freezing point of water decreases by 6.2 °c

therefore we can say that, the solution will have a higher boiling point and a lower freezing point

Another question on Chemistry

Chemistry, 21.06.2019 20:30

In a laboratory experiment, a fermenting aqueous solution of glucose and yeast produces carbon dioxide gas and ethanol. the solution was heated by burning natural gas in a bunsen burner to distill the ethanol that formed in the flask. during the distillation, the ethanol evaporated and then condensed in the receiving flask. the flame of the burner was kept too close to the bottom of the flask and some of the glucose decomposed into a black carbon deposit on the inside of the flask. during this experiment the following changes occurred. which of these changes involved a physical change and not a chemical change? check all that apply. 1-condensation of ethanol 2-evaporation of ethanol 3- formation of carbon dioxide gas from glucose burning of natural gas 4-formation of ethanol from glucose by yeast 5-formation of a carbon deposit inside the flask

Answers: 2

Answer

Chemistry, 22.06.2019 04:30

When the water vapor cools it condenses select a number that represents his process on the

Answers: 3

Answer

Chemistry, 22.06.2019 09:10

When a nucleus absorbs a neutron and then breaks apart, there are many products of the reaction. what is not a product of a nuclear fission reaction

Answers: 1

Answer

Chemistry, 22.06.2019 12:00

Most materials are not magnetic because their magnetism has worn off. their magnetic domains are arranged randomly. they lack magnetic fields. earth’s heat has destroyed their magnetism.

Answers: 1

Answer

You know the right answer?

Help me with chem pls!
...

Questions