Chemistry, 29.03.2021 07:50 sarahjohnson5621

How many liters would 18.0 grams of water vapor occupy at 273 K and 1.00 atm?

Answers: 1

Show answers

Answers

Answer from: ambercombs

Explanation:

Automobile tires are typically inflated to about 30 pounds of pressure per square inch. What is the typical air pressure of a tire in kPa?

206 KPa

When temperature-volume measurements are made on 1.0 mol of gas at 1.0 atm, a plot V versus T results in a

Straight line

3. A syringe initially holds a sample of gas with a volume of 285 mL at 355 K and 1.88 atm. To what temperature must the gas in the syringe be heated/cooled in order to have a volume of 435 mL at 2.50 atm?

720.0 K

At the same temperature and the same volume, a 20.0 grams sample of each of He, H2 , O2 or Cl2 were placed in three different flasks. Which gas will have the lowest pressure? Which will have the highest pressure?

(Cl2 will have the lowest pressure). (H2 will have the highest pressure).

The highest pressure ever produced in a laboratory setting was about 2.0 x 106 atm. If we have a 1.0 x 10-5 liter sample of a gas at that pressure, then release the pressure until it is equal to 0.275 atm, what would the new volume of that gas be?

(V2=73 L)

6. A soda bottle is flexible enough that the volume of the bottle can change even without opening it. If you have an empty soda bottle (volume of 2 L) at room temperature (25 0C), what will the new volume be if you put it in your freezer (-4 0C)?

A balloon contains 0.128 mol of gas and has a volume of 2.76L. if an additional 0.073 mol of gas is added to the balloon ( at the same temperature and pressure ), what will its final volume be?

(V2=4.33 L)

An "empty" aerosol can at 25 °C still contains gas at 1.00 atmosphere pressure. If an "empty" can is thrown into a 475 °C fire, what is the final pressure in the heated can?

(P2=2.51 atm)

Under what condition is a sample of gas most likely to behave ideally?

(At STP, where the temperature is 273 K and the pressure is 1.00 atm).

Calculate the pressure exerted by 0.39 mol of methane (CH4) in a container of volume 3.5L at 390 C?

(P= 2.9 atm).

How many molecules of N2 are in a 500.0 mL container at 780 mm Hg and 135 °C?

(9.23 x 1021 molecules of N2)

A 75.0 L steel tank at 20.0 °C contains acetylene gas, C2H2, at a pressure of 1.39 atm. Assuming ideal behavior, how many grams of acetylene are in the tank?

(113 g C2H2).

A steel bottle contains argon gas at STP. What is the final pressure if the temperature is changed to 115 °C?

(P2= 1.42 atm).

A 0.286-g sample of gas occupies 125 mL at 60. cm of Hg and 25 °C. What is the molar mass of the gas?

(70.9 g/mol).

What is the density of fluorine gas at STP?

1.70 g/L

What is volume of 12 gram of He at STP?

(V=67 L He).

What is density of 12 gram of He at STP?

(0.179 g/L).

8. What is volume of 12 mole of He at STP?

(V=270 L He).

One mole of which gas has the greatest density at STP?

A) Ar

B) N2

C) CO

D) All three gases have the same density.

Ar (has the highest Molar Mass.)

Which of the following would have a density of 1.21 g/L at 7.0 °C and 0.987 atm?

The followings are assumed in identical flasks at the same temperature and the same pressure (STP). When a 20.0 grams sample of each of He, H2 , O2 or Cl2 are placed in three different flasks, Which one will have highest density?

(Cl2; highest molar mass=highest Density).

What mass of NO2 is contained in a 13.0 L tank at 4.58 atm and 385 K?

(86.7 g NO2).

Which one of the followings He, H2 , O2 or Cl2 has the greatest density at STP?

Cl2

930g sample of an unknown compound occupies 490 mL at 298 K and 2.44atm. What is the molar mass of the unknown compound? Hint: calculate n, MM= (Gram/mol) or (g/n)

(MM=19000 g/mol).

Answer from: Quest

1= c 2= a or d3 = idk sorry 4= c5= c

Answer from: Quest

you gotta add the following molecules so we can give u an answer

explanation:

Another question on Chemistry

Chemistry, 22.06.2019 01:00

Which statement correctly describes potassium iodide, ki? there is a one-to-one ratio of potassium ions to iodide ions. potassium gains electrons and iodine loses electrons during the reaction. the lattice is held together by potassium anions and iodide cations.

Answers: 1

Answer

Chemistry, 22.06.2019 05:50

Astudent made a graph plotting the progress of a reaction over time. the student forgot to label the y-axis of the graph. a graph is shown with two graph lines. one graph line starts at a higher position on the y axis and slopes downwards towards the right. the other graph line starts at a lower position on the y axis and slopes upwards towards the right. the two graph lines stop short of intersecting each other and continue as separate lines which gradually become straight and parallel to the x axis. a vertical line is shown at a point where the two graph lines finally became parallel to the x axis. this vertical line is labeled equilibrium. the title on the x axis is time and an arrow pointing towards the right is shown above time. the title on the y axis is left blank. what best explains the label that the student should use on the y-axis? amount, because as the amount of product decreases, the amount of reactant increases over time. reaction rate, because forward and backward reaction become equal at equilibrium. amount, because the amounts of reactants and products become constant after equilibrium is reached. reaction rate, as the rate of forward reaction increases and rate of backward reaction decreases over time.

Answers: 3

Answer

Chemistry, 22.06.2019 23:00

Which type of intermolecular attractions holds ammonia molecules together with other ammonia molecules?

Answers: 3

Answer

Chemistry, 23.06.2019 01:00

Imagine if during the cathode ray experiment, the size of the particles of the ray was the same as the size of the atom forming the cathode. which other model or scientific observation would have also been supported? 1. this would support dalton's postulates that proposed the atoms are indivisible because no small particles are involved. 2. this would support bohr's prediction about electrons moving in orbits having specific energy. 3. this would support bohr's prediction about electrons being randomly scattered around the nucleus in the atom. 4. this would support dalton's postulates that proposed that atoms combine in fixed whole number ratios to form compounds.