Chemistry, 04.03.2021 20:40 staciagirl6672
What are the reasons to determine the melting point of a sample in a melting point apparatus? Select one or more:
A. U Assessment of the sample's purity
B. Conversion of the solid sample to liquid
C. Identification of an unknown sample
D. Removal of impurities from the sample
To prepare a sample in a capillary tube for a melting point determination, gently tap the tube into the sample with the Choose... end of the tube down. Continue tapping until the sample Choose.. end of the tube down, tap the sample down slowly or Choose... to move the sample down Then, with the Choose... faster.
To prepare a sample in a capillary tube for a melting point determination, gently tap the tube into the sample with the a) open, b) closed end of the tube down. Continue tapping until the sample a) completely fills the tube b) is a couple millimeters high, c) has a single crystal in the tube. Then, with the a) closed, b) open end of the tube down, tap the sample down slowly or a) heat the tube up, b) drop the tube into a longer tube, c) shake the tube in the air to move the sample down faster.
Answers: 1
Another question on Chemistry
Chemistry, 21.06.2019 23:00
What is the volume of the fluid in the graduated cylinder with accuracy and measured to the correct degree of precision? 41.2 ml 42.0 ml 41.23 ml 41.89 ml
Answers: 1
Chemistry, 22.06.2019 05:00
You mix the pks of succinic acid are 4.21 and 5.64. how many gramsa graduate student at sdsu wants to measure the activity of a particular enzyme at ph 4.0. to buffer her reaction, she will use a buffer system based on one of the acids listed below, which acid is most appropriate for the experiment? of monosodium succinate (fw = 140 g/mol) and disodium succinate (fw = 162 g/mol) must be added to 1 l of water to produce a solution with a ph 5.28 and a total solute concentration of 100 mm? (assume the total volume remains 1 liter, answer in grams monosodium succinate, grams disodium succinate, respectively.) volumes of 0.05 m nah2po4 and 0.05 m na2hpo4 (pk's for phosphoric acid are 2.15, 6.82 and 12.38). which of the following best describes the resulting solution?
Answers: 2
Chemistry, 23.06.2019 03:20
High-pressure liquid chromatography (hplc) is a method used in chemistry and biochemistry to purify chemical substances. the pressures used in this procedure range from around 500 kilopascals (500,000 pa) to about 60,000 kpa (60,000,000 pa). it is often convenient to know the pressure in torr. if an hplc procedure is running at a pressure of 1.03×108 pa , what is its running pressure in torr?
Answers: 3
Chemistry, 23.06.2019 03:30
In general metals get as you move from left to right across the periodic table.
Answers: 1
You know the right answer?
What are the reasons to determine the melting point of a sample in a melting point apparatus? Select...
Questions
Business, 18.10.2019 05:10
History, 18.10.2019 05:10
Biology, 18.10.2019 05:10
Social Studies, 18.10.2019 05:10
Mathematics, 18.10.2019 05:10
Mathematics, 18.10.2019 05:10
Biology, 18.10.2019 05:10
Biology, 18.10.2019 05:10
History, 18.10.2019 05:10
Chemistry, 18.10.2019 05:10
Mathematics, 18.10.2019 05:10
