The flask contains 10.0 mL of HCl and a few drops of phenolphthalein indicator. The buret contains 0.160 M NaOH. It requires 18.2 mL of the NaOH solution to reach the end point of the titration. A buret filled with a titrant is held above a graduated cylinder containing an analyte solution. What is the initial concentration of HCl

Approximately (rounded to two significant figures.)

Explanation:

The unit of concentration is the same as (moles per liter.) On the other hand, the volume of both the solution and the original solution here are in milliliters. Convert these two volumes to liters:

Calculate the number of moles of in that of solution:

.

reacts with at a one-to-one ratio:

.

Coefficient ratio:

.

In other words, one mole of would neutralize exactly one mole of . In this titration, of was required. Therefore, the same amount of should be present in the original solution:

.

Calculate the concentration of the original solution:

.

(newtons first law)

conservation of momentum law states :

momentum before collision = momentum after collision

momentum p (kg-m/s)= mass * velocity

say moving car=1 000 kg, velocity = 10 m/s then p = 1 000*10= 10 000 kg-m/s

say still car = 2 000 kg, velocity = 0 m/s then p = 2 000* 0 = 0 kg-m/s

total momentum prior to collision = 10 000 + 0 = 10 000 kg-m/s

momentum after collision = 10 000 kg-m/s

mass now = 1 000 kg+2 000 kg = 3 000 kg

10 000 = 3 000 kg* velocity m/s

10 000/3 000 = velocity

3.33 m/s = velocity after collision

an impulse is a force applied over time , momentum is exclusive of external forces and a perfect collision is implied