Chemistry, 28.08.2020 14:01 zanedog2018

PLEASE I NEED THIS IM BEING TIMED construct a graph of temperature versus time. Put temperature on the y-axis and time on the x-axis. Graph all three sets of data on the same graph. Use a different colored pencil for each test material. Provide a key on the graph relating the pencil color to the test material. Calculate the change in temperature from start to finish for the air and each of the samples and record on your data sheet. Which water sample lost the least amount of heat energy over the 6-minute time interval? Was the rate of heat loss constant during each experiment? How can you tell? Which material was the best insulator? Which material was the least effective insulator? Write a summary paragraph discussing this experiment and the results. Summarize the conclusions that you can draw from this experiment. Explain why the design of the bird's nest provides good insulation for the eggs. For the control, and each test sample, you will be measuring the amount of heat lost by the water in the calorimeter over 6 minutes, taking the temperature every 30 seconds. Be sure to record your data on your data sheet .

Answers: 1

Show answers

Another question on Chemistry

Chemistry, 22.06.2019 05:10

How many miles of water are produced if 5.43 mol pbo2 are consumed

Answers: 1

Answer

Chemistry, 22.06.2019 05:40

Salicylic acid is a very important acid. it is used to synthesize the aspirin by treating with acetic anhydride. a 0.2015-g sample of salicylic acid was dissolved in a 100.00-ml volumetric flask, and the solution was diluted to the mark. a 10-ml aliquot of this solution was titrated with standard naoh (0.01130 + 0.2% n) to a phenolphthalein faint pink color end point at 19.81 ml. (a) (calculate the normality of the salicylic acid solution used in the titration. (b) assuming the salicylic acid is pure, what is the equivalent weight of the salicylic acid? practice problems for the final exam (continued) (c) (calculate the inherent error in the determination of the equivalent weight you calculated in part (b). use the following absolute errors in the equipment /glassware when calculating the inherent error. 5.00-ml pipet: + 0.02 ml 100-ml volumetric flask: + 0.08 ml analytical balance: + 0.2 mg 25-ml buret: + 0.03 ml

Answers: 2

Answer

Chemistry, 22.06.2019 09:00

At 300 mm hg, a gas has a volume of 380 l, what is the volume at standard pressure

Answers: 1

Answer

Chemistry, 22.06.2019 12:40

When 13.3 g koh is dissolved in 102.7 g of water in a coffee-cup calorimeter, the temperature rises from 21.4 °c to 31.53 °c. what is the enthalpy change per gram of koh (j/g) dissolved in the water? * take the density of water as 1.00 g/ml. * assume that the solution has a specific heat capacity of 4.18 j/g*k. enter to 1 decimal place. do not forget the appropriate sign /(+). canvas may auto-delete the (+) sign

Answers: 2

Answer

You know the right answer?

PLEASE I NEED THIS IM BEING TIMED construct a graph of temperature versus time. Put temperature on t...

Questions