Chemistry, 25.09.2019 00:30 SuBzErO24

It is required to design an ro module for production of 2500 mº/day potable water containing not more than 250 ppm salt from sea water containing 44 g salt per litre. a proprietary asymmetric cellulose acetate membrane with an inherent salt rejection ability of 98% is to be used. the water permeation coefficient is 0.045 m²/m² day. atm. the recovery of the feed water should be 35% and an operating pressure of 70 atm gauge is suggested. the permeate side is at essentially atmospheric pressure. if spiral wound modules of 5 m² effective membrane area each is used, how many modules in parallel are required? what fraction of the input power can be recovered from the retentate if a turbine of 70% efficiency is used for energy recovery? the osmotic pressure of 5% brine (linear in salt concentration) is 39.5 atm

Answers: 3

Show answers

Another question on Chemistry

Chemistry, 21.06.2019 14:30

Heat flow inside earth activity i chose chemistry cause there is no science alert! the newspaper has been hacked, and all of the headlines have been changed to reflect old legends. it is your task to make sure they are corrected. choose one of the newspaper headlines. you will rewrite the headline and a one-to-two-paragraph article to make the news scientifically correct. be sure to include the following in your corrected newspaper article: new title reflecting correct information detailed information about the processes and tectonic plate interactions that are causing the geological event to occur real-world example of where to find the geological event on earth (picture and location) also review the grading rubric before you begin.

Answers: 1

Answer

Chemistry, 22.06.2019 05:50

Fill in the coefficients that will balance the following reaction: a0cr2(so4)3 + a1agno3 -> a2cr(no3)3 + a3ag2so4

Answers: 1

Answer

Chemistry, 22.06.2019 08:40

For each of the following compounds, write the formula then predict whether it would be a strong, weak, or non-electrolyte when placed in di water. for the ionic compounds only, put (s) or (aq) after the forrmula formula strong, weak or non electrolyte? a calcium hydroxide b. silver carbonate c. lead(ii) sulfate d. phosphorus trifluoride e. sodium phosphide f barium sulfate g. strontium acetate h. zinc nitrate

Answers: 3

Answer

Chemistry, 22.06.2019 10:00

Ill give brainiestif one neutron initiates a fission event that produces two neutrons in the products, how many new reactions can now be initiated? if each of the neutrons produced in the first fission event then initiates a fission event that produces one neutron in the products, how many new reactions can now be initiated by each neutron? how many neutrons in total were produced by the two fission events described?

Answers: 2

Answer

You know the right answer?

It is required to design an ro module for production of 2500 mº/day potable water containing not mor...

Questions