What are the three advantages of using steam in a process? 10. saturated steam at 1 atm is discharged from a turbine at a rate of 1,200 kg/h at 100°c [h-2676 kj/kg). superheated steam at 300°c[h-3074 kj/kg) and i atm are needed as a feed to a heat exchanger, to produce it, the turbine discharge stream is mixed with superheated steam available from a second source at 400°c [specific h-3278 kj/kg) [specific v=3.11 m /kg) and 1 atm. the mixing unit operates adiabatically. calculate the amount of superheated steam at 300°c produced and the required volumetric flow rate of the 400°c steam. draw the pfd.

For questions 1 and 2, consider the following experimental data.hydrogen emission lines were detected at the following wavelengths (in nm): 121.6102.697.395.093.8question 1use the electromagnetic radiation classifications below and figure 1-1 in the introductory information for this lab (in the lab manual) to determine the nf value for the experimental data provided? wavelength, ? (nm) 650 700 550 600 400 450 500 visible spectrum wavelength, ? (m) 11 10 3 10 10 10 8 10 5 10 10 -10 10 9 10 10 10 10 -12 10 microwave radio infrared x-ray ultraviolet gamma 1020 1019 1018 1 1016 015 1014 01 12 109108 frequency, v (hz)a.1b. 2c. 3d. 4e. 5question 2using the data for the emission line with the longest wavelength, the known value of nf (from question 1 in this prelab), and the value of ni (deduced from the ? and nf values) calculate the rydberg constant for hydrogen (rh) in units of m-1.a) 1.097 x 10-11 m-1b) 5.921 x 107 m-1c) 1.097 x 10-2 m-1d) 9.252 x 106 m-1e) 1.097 x 107 m-1