Hurry

use the information in the table to describe the temperature-vs.-time diagrams.

the diagram for gallium will have flat, horizontal lines °c.
1.) at 30 and 2204
2.) below 30 and above 2204
3.) betweem 30 and 2204

the diagram for methane will have a line representing -183°c and -162°c.
1.) diagonal
2.) flat

1.) liquid phase
2.) solid phase
3.) melting
4.) boiling

for gold, the boiling point corresponds to the y-value at °c of
1.) 1064
2.) 2856

1.) bottom horizontal line
2.) top horizontal line
3.) the middle of the diagonal line

for nitrogen, the line at -210°c will be which represents
1.) diagonal
2.) flat

1.) the change from a solid to a liquid
2.) the heating of the solid phase
3.) the heating of the liquid phase

The diagram for gallium will have flat, horizontal lines at 30 and 2204°C.

The diagram for methane will have a diagonal line representing the liquid phase between -183°C and -162°C.

For gold, the boiling point corresponds to the y-value at 2856°C of the top horizontal line.

For nitrogen, the line at -210°C will be flat which represents the change from solid to a liquid.

From the table given, we can see that galium has a melting point of 30°C and a boiling point is 2204°C. The melting point is the point at which a substance changes from the solid to the liquid state.

The diagram for methane will have a diagonal line representing the liquid phase between -183°C and -162°C. At this point, the temperature will rise which is depicted by the diagonal line along the point.

For gold, the boiling point corresponds to the y-value at 2856°C of the top horizontal line. This can be inferred from the table given. Lastly, for nitrogen, the line at -210°C will be flat which represents the change from solid to liquid.

Read related link on:

link

Answers:

Question 1:

The diagram for gallium will have flat, horizontal lines at 30 and 2204 °C.

Questoin 2:

The diagram for methane will have a diagonal line representing the liquid phase between -183°C and -162°C.

Question 3:

For gold, the boiling point corresponds to the y-value at 2856 °C of the top horizontal line

Question 4.

For nitrogen, the line at -210°C will be flat, which represents the change from a solid to a liquid

Explanations:

Question 1:

The diagram for gallium will have flat, horizontal lines at 30 and 2204 °C.

The table shows that the melting point of gallium is 30°C and its boiling point is 2204°C.

Melting point is the temperature at which the substace changes its state from solid to liquid. During that change, the temperature of the substance does not change, because the heat supplied is used to accomplish the phase change. So, the temperature is constant and that means that portion of the diagram is flat.

The same is valid during boiling: the temperature remains constant while the substance is passing from liquid to gas at the boiling point.

Questoin 2:

The diagram for methane will have a diagonal line representing the liquid phase between -183°C and -162°C.

Between the melting (-183°C) and boiling (-162°C) points of methane, its temperature will increase more or less linearly, which is represented with a diagonal (slant) line between those points. During this interval the heat is used to increase the temperature and no phase of change happens.

Question 3:

For gold, the boiling point corresponds to the y-value at 2856 °C of the top horizontal line

The table shows that the boiling point of gold is 2,856°C.

In a temperature-vs.-time diagram the temperature is represented on the vertical axis (y-value) and the time is represented on the horizontal axis.

Since, the temperature of the substance does not change during boiling, the line during the time that this change of phase is happening is flat. And since this temperatue is higher than the melting temperature, this is the top horizontal line in the diagram.

Question 4.

For nitrogen, the line at -210°C will be flat, which represents the change from a solid to a liquid

The table shows that the melting point of nitrogen is -210°C, that means that the temperature will remain constant at -210°C while the substance is absorbing heat to pass from solid to liquid.

In conclusion, you must remember that all the phase changes, melting (from solid to liquid), freezing (from liquid to solid), boilng (from liquid to gas), and condensing (from gas to liquid) happens at constant temperature, and so the temperature - vs. - time diagrams show flat lines (constant y-values) during those intervals of time.

step-by-step explanation:

whole numbers, zero or greater

i think tornado but not 100%