Business, 27.09.2019 05:10 moranmar2283

Braverman company has two manufacturing departments—finishing and fabrication. the predetermined overhead rates in finishing and fabrication are $18.00 per direct labor-hour and 110% of direct materials cost, respectively. the company’s direct labor wage rate is $16.00 per hour. the following information pertains to job 700: finishing fabrication direct materials $ 410 $ 60 direct labor $ 128 $ 48 required: 1. what is the total manufacturing cost assigned to job 700? 2. if job 700 consists of 15 units, what is the unit product cost for this job?

Answers: 1

Show answers

Answers

Answer from: Kcmayo6019

Instructions are listed below

Explanation:

Giving the following information:

The predetermined overhead rates:

Finishing: $18.00 per direct labor-hour

Fabrication: 110% of direct materials cost.

The company’s direct labor wage rate is $16.00 per hour.

The following information pertains to Job 700:

Finishing: Direct materials $ 410 - Direct labor $ 128

Fabrication: Direct materials $ 60 - Direct labor $ 48

A) Total manufacturing cost= manufacturing cost allocated to finishing + manufacturing cost allocated to fabrication

Number of hours= (128/16)= 8 hours

Total manufacturing cost= (8 hours* 18) + ($60*1.10)= $210

B) Total cost per unit= total cost/Q

Total cost per unit= (total cost of finishing + total cost of fabrication)/Q

Total cost per unit= [(410+128+144)+(60+48+66)]/15

Total cost per unit= $57.07

Answer from: gabiii262

The overhead rates are the rates that are allocated to the production of a product or service. The overhead rate is applied to the direct costs to production by spreading or allocating the overhead costs based on the specific measures.

The predetermined overhead rates:

Finishing- $18.00 per direct labor-hour

Fabrication- 110% of direct materials cost.

The company’s direct labor wage rate is $16.00 per hour.

The following information pertains to Job 700:

Finishing: Direct materials $ 410 - Direct labor $ 128

Fabrication: Direct materials $ 60 - Direct labor $ 48

A) Total manufacturing cost= manufacturing cost allocated to finishing + manufacturing cost allocated to fabrication

$\begin{aligned}\text{Number of hours}=\frac{128}{16}= 8 \ \text{hours}\end{aligned}$

$\begin{aligned}\text{Total manufacturing cost}= (8\ \text{hours}\times 18) + ($60\times1.10)= $210\end{aligned}$

B) $\begin{aligned}\text{Total cost per unit}= \frac{\text{total cost}}{\text{Q}}\end{aligned}$

$\begin{aligned}\text{Total cost per unit}= \frac{\text{total cost of finishing + total cost of fabrication}}{\text{Q}}\end{aligned}$

$\begin{aligned}\text{Total cost per unit}= \frac{(410+128+144)+(60+48+66)}{15}\end{aligned}$

The total cost per unit is $57.07

To know more about the calculation of the different overhead rates, refer to the link below:

link

Answer from: Quest

you had 23.00$ because 28 - 5 = 23 then put it in dollar form

Answer from: Quest

answer; avoid combining alcohol and

Another question on Business

Business, 22.06.2019 19:20

Garrett is an executive vice president at samm hardware. he researches a proposal by a larger company, maximum hardware, to combine the two companies. by analyzing past performance, conducting focus groups, and interviewing maximum employees, garrett concludes that maximum has poor profit margins, sells shoddy merchandise, and treats customers poorly. what actions should garrett and samm hardware take? a. turn down the acquisition offer and prepare to resist a hostile takeover. b. attempt a friendly merger and use managerial hubris to improve results at maximum. c. welcome the acquisition and use knowledge transfer to impart sam hardware's management practices. d. do nothing; the two companies cannot combine without samm hardware's explicit consent.

Answers: 1

Answer

Business, 22.06.2019 20:00

Which motion below could be made so that the chair would be called on to enforce a violated rule?

Answers: 2

Answer

Business, 22.06.2019 20:50

How has apple been able to sustain its competitive advantage in the smartphone industry? a. by reducing its network effects b. by targeting its new products and services toward laggards c. by driving the price for the end user to zero d. by regularly introducing incremental improvements in its products

Answers: 1

Answer

Business, 22.06.2019 21:50

Abus pass costs $5 per week. which of the following equations shows the total cost in dollars, t, of the bus pass for a certain number of weeks, w? t = 5w w = 5t t = 5 + w w = 5 + t

Answers: 3

Answer

You know the right answer?

Braverman company has two manufacturing departments—finishing and fabrication. the predetermined ove...

Questions