Arts, 29.06.2021 20:40 dbautista

Symbolism is a.
an expression, practice, or usage of cultural characteristics.
b.
the likeness of someone, usually painted or sculpted.
c.
a memorial, a lasting remembrance, evidence by displaying another image in its place.
d.
the art of using symbols, or having symbolic meaning.

Please select the best answer from the choices provided

Answers: 3

Show answers

Another question on Arts

Arts, 22.06.2019 07:40

Solve the system of equations below.4x+y=162x + 3y = -2

Answers: 1

Answer

Arts, 23.06.2019 13:00

One art critic referred to painters in the fauvism movement as "wild beasts". where did that title come from? what were some of the characteristics of fauvism?

Answers: 1

Answer

Arts, 23.06.2019 22:50

When writing a puppet script, you should not a. props b. scenery c. puppets d. costumes

Answers: 2

Answer

Arts, 23.06.2019 23:30

Describe the discovery and importance of this piece of ancient african art.

Answers: 1

Answer

You know the right answer?

Symbolism is a.
an expression, practice, or usage of cultural characteristics.
b.

Questions

Engineering, 11.07.2019 01:10

An ideal gas of butane in a piston-cylinder device is initially at 8a fahrenheit and 1 bar undergoes a thermodynamic cycle consisting of three process...

Engineering, 11.07.2019 01:10

Calculate the speed of a (i) 0.5-mev electron. ii) 25-mev electron. (b) how much greater than the rest mass is the mass of each of the energetic elect...

Engineering, 11.07.2019 01:10

1.0 kg of air at 300 k and 100 kpa (state 1) is slowly compressed in a piston cylinder (closed system). the compression process is an isothermal proce...

Engineering, 11.07.2019 01:10

A16-bit aid converter has a full-scale range+10 v. what is the resolution of this a/d in volts? if this a/d were used to measure temperature using a...

Engineering, 11.07.2019 01:10

List the different types of solar cells and their efficiency ranges...

Engineering, 11.07.2019 01:10

Assuming the following, what is the fill factor for the following solar cell? power=100w voc=30v isc=10a...

Engineering, 11.07.2019 01:10

Increasing temperature will reduce the corrosion rate. a)-true b)- false...

Engineering, 11.07.2019 01:10

The yield stress of a tension specimen machined from a 2-m wide by 0.6-cm thick copper sheet is 145 mpa. the sheet is rolled further with an applied t...

Engineering, 11.07.2019 01:10

Asampling of 409 motor shafts from a very large production batch shows a sample standard deviation in diameter of 0.021 mm with a sample mean of 9.251...

Engineering, 11.07.2019 01:10

Explain the aerodynamics of airbus a380 in terms of 1)- l/d 2)- cl max 3)- cd...

Engineering, 11.07.2019 01:10

Derive the expression for the thermal efficiency of an air standard bray ton cycle in terms of the pressure ratio and the ratio of specific heats....

Engineering, 11.07.2019 01:10

(a) calculate the speed of a 25-mev proton (b) what is the percent increase in mass of this proton over its rest mass?...

Engineering, 11.07.2019 01:10

Explain the moire's method and discuss the mismatch techniques of moire's strain analysis with fringe ordering....

Engineering, 11.07.2019 01:10

Which of the following is not project objectives' characteristies? a)- complex b)- realistic c)- time related...

Engineering, 11.07.2019 01:10

The initial volume of 0.2 kg of gas was 0.15 m' at a temperature of 288 k and a pressure of 1,03 x 10' nm': after adiabatie compression to 0.054 m',...

Engineering, 11.07.2019 01:10

Athin walled double pipe parallel-flow heat exchanger is to be used to heat oil (cp- 2100 j/kg. k) from 20°c to 60°c at a rate of 0.3 kg/s by steam hg...

Engineering, 11.07.2019 01:10

Prove the relationship between the specific heat constant pressure (op), specific heat at constant volume (cv) and the specifice gas constant (r)...

Social Studies, 11.07.2019 01:10

Which type of sociologists would consider deviance to be a natural part of society?...

Physics, 11.07.2019 01:10

Aparticle of mass m moves along a straight line with initial speed vi. a force of magnitude f pushes the particle a distance d along the direction of...

Health, 11.07.2019 01:10

The proper way to increase progression in weight training is to gradually increase the amount and type of stimulus applied to the muscle. true or fals...