Where should photographers apply grease in a tripod?
a. the upper part of the leg thread
b. the lower part of the leg thread
c. the upper part of the bushings
d. the lower part of the bushings

Answer:

The photographers apply the grease in a tripod at the upper part of the leg thread.

Explanation:

The photographers use to apply the grease at the upper part of the leg thread while cleaning the tripod. A little goes a long way - and if you put too much, you'll just end up having to wipe it off later. We put a little amount of grease on the threads and then screw the leg segments into place slowly - screwing them in and out a bit as we go to help spread the grease around the threads.

The pieces should turn smoothly if you hear a rough grating sound as you put the pieces back together, check for junk in the threads. You have to do a better job cleaning. You'll need grease in all the moving parts - there's no need to grease screws that should remain tight.

yes, it is all frozen.

explanation:

it's all focused on the way you angle and put all of these this in pespective. say you wanted you artwork to be famous, you would want to align and put all of these into grasp. the imagery give off a good descriptive matter. proportion is aligned with the color and mood. balance is how you place everything and if there is too much or too little of. design is the main thing if you want your art to be amazing

virtual smiles! : )

~mqddie